BanggoodでのZDレーシング9116メタルブラシレスRCカーのトップポジティブレビュー Japan|購入日本

18% OFF ZDレーシング9116 1/8 4WD ブラシレスエレクトリックトラックメタルフレーム 100km/h RCカー電気部品なし 212,18€ 257,39€ View It

全体：

FML 20/03/2021

I bought two MT-8 kits with the CNC upgrades. One to drive and another a few months later as a spare part dispenser. When disassembling the second MT-8, I noticed very negatively that way too much loctite was used. I didn't get some screws loosened and damaged my tool in the process. I had to drill out the screws. The lower suspension brackets (8045 + 8046) were then destroyed. Too much loctite was also used on the c-mounts (8134) and in the hex wheel hub mounts (8086). The screws can only be loosened with very massive screwdrivers. The seal (8265) for the receiver box was missing in both kits. I have installed a 1950 Kv Surpass Taurus 4274 bruhless motor with the standard 13T gear (8195) and standard 48T spur gear (8473) on my MT-8. I recommend installing the stronger motor base (8487). From a 3S Lipo the MT-8 is already quite fast. With a 4S Lipo, wheelies are no problem and the MT-8 becomes a projectile that hardly brings the engine power to the road. The MT-8 then flies over the area and is difficult to control. The construction then reaches its limit. Because of the large wheels, I recommend a powerful 35 kg servo. I also recommend installing the front bumper (8481) and the rear wheel (8482). The front bumper can be upgraded with LEDs. I have a lot of fun with the car, but I would like a little more care when assembling it in the factory. And please don't use so much loctite anymore.

コメント (10)

提出

irarkh you need to heat up the screws well to open the red loctite zd used for mounting
返信 21/04/2021

提出
desmo71 Si ti confermo che se scaldi le viti con pistola d aria calda le sviti molto facilmente
返信 15/05/2021

提出
Marschall_l DieSchraube mit ein Mini-Brenner oder Feuerzeug zu erhitzen, ist nicht praktikabel wenn Kunststoffteile in der n'he sind.

Ich bringe den Imbusschl?ssel selber zum Gl?hen, steck in in die Madenschraube, warte 2-3 Sekunden, und die schraube lst sich wie Butter.
返信 26/05/2021

提出
BG384812143 que motor y esc utilizastes
返信 09/06/2021

提出
EdBoy313 What's up my names is Ed and I brought the other version of this and lost a couple screws, could you put a link to a good screw set for this?
返信 15/06/2021

提出
FML Thank you for your help. Next time i will heat the screws.
返信 16/06/2021

提出
Hello, thanks for posting a very comprehensive and valuable review! could you share your general opinion on the Taurus motor?
返信 17/07/2021

提出
thanks for a comprehensive and valuable review! would you care to share your opinions and experiences with the surpass 4274 motor?
返信 17/07/2021

提出
BG182365421 @FML the suspension mounts can still be used just neaten up the edge's n use bigger screws that's what I do all the time
返信 12/08/2021

提出
João Geadas You dont need to heat the screws, just buy a eletric screwdriver and your life will shine! Believe me.
返信 14/10/2021

提出

会社概要	お問い合わせ	お支払い&配送情報	パートナーシッププログラム
Banggood.comについて保証と返品ポリシー規約と条件プライバシーポリシービジネス・法人売買サイトマップ特定商取引法に基づく表記	お問い合わせ初心者ガイドヘルプセンター専門業務	支払い方法配送について配送先送達予定時間 BGpayに関して	ファッションブロガー・プログラムアフィリエイトプログラム卸売りプログラムドロップシッピングレビュークラブ

会社概要

お問い合わせ

お支払い&配送情報

パートナーシッププログラム